Skip to product information
1 of 4

Red (Copper Tone) Stainless Steel Laser Spray Can - 2oz Aerosol

Hurry up ! Sale ends in:

Regular price
$29.11
Regular price
$42.95
Sale price
$29.11
Shipping calculated at checkout.
Pack

READY TO SHIP OCTOBER 31, 2022

Shipping information

• Ships Worldwide
Free shipping on orders over $100 in the US only.
• This is a PRE-ORDER, and will be Shipped once product is available.

Contact us

Brilliance Laser Inks, LLC 
2200 Garry Road, Suite 3 Cinnaminson,
New Jersey, USA 08077


Phone609-534-7008 ext. 118 / 888-357-1628
Fax609-534-7009 / 888-357-1629
Emailsupport@brilliancelaserinks.com

Become A Distributor / Bulk Buy

Red (Copper Tone) Metal Laser Spray Can - 2oz Aerosol Aerosol Brilliance Laser Inks, LLC Red (Copper Tone) Metal Laser Spray Can - 2oz Aerosol Aerosol Brilliance Laser Inks, LLC Red (Copper Tone) Metal Laser Spray Can - 2oz Aerosol Aerosol Brilliance Laser Inks, LLC

Product Features

Why Brilliance Laser Inks?

Laser marking made easy with our Aerosol Spray (in 2 oz & 12 oz)

Exceptionally adaptable laser marking inks to create high quality permanent mark on a various metal surfaces.

With just a shake and a spray, conveniently make a permanent mark on your metal substrate with our aerosol spray. It comes in two sizes: 2 oz. and 12 oz to fit your needs.

Note that this product does not include any alcohol in the package. Below application tutorial is for instructional purposes only.

  • Shake & spray application
  • Easy to apply. Easy to wash off.
  • Anti-Clog Technology
  • Permanent Mark
  • Quick to dry
  • Marks on various metals
  • Up to 4,000 square inch of coverage
  • Works with CO2 and Fiber Laser Nd:YAG Laser Systems

How To Apply Aerosols

  • Step 1

    Step 1

    Clean the substrate with denatured alcohol so it's free of any dirt and oil.

    Shake the bottle well for approximately 2 minutes to make sure that all contents are mixed.

  • Step 2

    Step 2

    Hold the bottle at 45° degrees and spray 6-8 inches from the substrate surface using left to right motion. Apply a thin coat as long as you do not see through the surface.

    Wait for the mixture to dry completely or use a hair dryer to dry it in seconds.

  • Step 3

    Step 3

    Adjust and focus your laser settings according to the material and make your mark!

    You may refer to the table below on Suggested CO2 Laser Machine Settings.

  • Step 4

    Step 4

    No waiting time needed to wash off! Rinse with tap water or wipe with a wet cloth.

    Voila! You now have a permanent on a finished product.

CO2 Laser Settings

Substrate Power Speed in Percent Speed in mm/sec DPI
General Metals (Tool steel, Stainless, Mild steel etc.) 30W 10% 100 350-500
100W 30% 300 350-500
Aluminum 30W 1% 50 350-500
100W 5% 100 350-500
Brass, Copper and other similar high heat conducting metals 30W 3% 75 350-500
100W 10% 150 350-500
**Disclaimer The above is general starting guidelines, settings may vary for different lasers and or grades of substrate

Fiber Laser Settings

Substrate Power Speed in mm/sec Q-frequency Hatch or DPI
Stainless Steel 10W 50 200 - 500 KHz 0.1 mm
Aluminum 10W 50 40 - 80 KHz 0.1 mm
Brass 10W 50 40 - 80 KHz 0.1 mm
Copper 10W 50 40 - 80 KHz 0.1 mm
Titanium 10W 50 200 - 500 KHz 0.1 mm
**Disclaimer The above is general starting guidelines, settings may vary for different lasers and or grades of substrate
**Please note power,speed and Q-Frequency units match with your laser
** Q-Frequency: You may need to go to advanced settings to change the Q-Frequency above 80 KHz