Follow these easy 4 steps below for better results.
Step 1. Clean and Shake
Clean the substrate with denatured alcohol so it's free of any dirt and oil. Shake the bottle well to make sure that all contents are mixed.
Note you can apply any kind of alcohol.
Step 2. Spray and dry
Hold the bottle at 45° degrees and spray 6-8 inches from the substrate surface using left to right motion. Apply a thin coat as long as you do not see through the surface.
Step 3. Mark
Adjust and focus your laser settings according to the material and make your mark!
Step 4. Wash
No waiting time needed to wash off! Rinse with tap water or wipe with a wet cloth.
Voila! You now have a permanent on a finished product
Here's the result!
On this process we use our Red Metal Copper Laser Spray to mark this stainless steel tag.
Watch the full video here!
Suggested Laser Settings
40 Watts Diode Laser
-
Stainless Steel
-
Aluminum
-
Copper
-
Brass
Experience Precision: Brilliance Laser Inks Aerosol Results
Discover the stunning outcome achieved with Brilliance Laser Inks Aerosol Cans through our sample gallery images. This innovative product is designed for optimal laser marking on various substrates, delivering sharp, high-contrast, and durable markings.
