Play video
Play video

Black Metal Laser Spray Can - 2oz Aerosol

Regular price: $21.21
Regular price: ~~$29.45~~
Sale price: $21.21

Tax included. Shipping calculated at checkout.

Product variants

Specifications

Shipping information

• Ships Worldwide - DDP
• No Hidden Fees, Prepaid Duties and Taxes
• Free shipping on orders over $100 in the US only.
• Ships same business day* in the US and Canada, delivers in 1-4
• Delivers within 4-10 business days for the rest of the world

Click here for full shipping policy and breakdown

Contact Us

Brilliance Laser Inks, LLC
2200 Garry Road, Suite 3 Cinnaminson,
New Jersey, USA 08077

Phone: 609-534-7008 ext. 118 / 888-357-1628
Fax: 609-534-7009 / 888-357-1629
Email: support@brilliancelaserinks.com

Become A Distributor / Bulk Buy

Product Features

Why Brilliance Laser Inks?

Laser marking made easy with our Aerosol Spray (in 2 oz & 12 oz)

Exceptionally adaptable laser marking inks to create high quality permanent mark on a various metal surfaces.

With just a shake and a spray, conveniently make a permanent mark on your metal substrate with our aerosol spray. It comes in two sizes: 2 oz. and 12 oz to fit your needs.

Note that this product does not include any alcohol in the package. Below application tutorial is for instructional purposes only.

Shake & spray application
Easy to apply. Easy to wash off.
Anti-Clog Technology
Permanent Mark
Quick to dry
Marks on various metals
Up to 4,000 square inch of coverage
Works with CO2 and Fiber Laser Nd:YAG Laser Systems

How To Apply Aerosols

Step 1

Clean the substrate with denatured alcohol so it's free of any dirt and oil.
Shake the bottle well for approximately 2 minutes to make sure that all contents are mixed.
Step 2

Hold the bottle at 45° degrees and spray 6-8 inches from the substrate surface using left to right motion. Apply a thin coat as long as you do not see through the surface.
Wait for the mixture to dry completely or use a hair dryer to dry it in seconds.
Step 3

Adjust and focus your laser settings according to the material and make your mark!
You may refer to the table below on Suggested CO2 Laser Machine Settings.
Step 4

No waiting time needed to wash off! Rinse with tap water or wipe with a wet cloth.
Voila! You now have a permanent on a finished product.

CO2 Laser Settings

Substrate	Power	Speed in Percent	Speed in mm/sec	DPI
General Metals (Tool steel, Stainless, Mild steel etc.)	30W	10%	100	350-500
General Metals (Tool steel, Stainless, Mild steel etc.)	100W	30%	300	350-500
Aluminum	30W	1%	50	350-500
Aluminum	100W	5%	100	350-500
Brass, Copper and other similar high heat conducting metals	30W	3%	75	350-500
Brass, Copper and other similar high heat conducting metals	100W	10%	150	350-500

**Disclaimer The above is general starting guidelines, settings may vary for different lasers and or grades of substrate

Fiber Laser Settings

Substrate	Power	Speed in mm/sec	Q-frequency	Hatch
Stainless Steel	10W	50	200 - 500 KHz	0.1 mm
Aluminum	10W	50	40 - 80 KHz	0.1 mm
Brass	10W	50	40 - 80 KHz	0.1 mm
Copper	10W	50	40 - 80 KHz	0.1 mm
Titanium	10W	50	200 - 500 KHz	0.1 mm

**Disclaimer The above is general starting guidelines, settings may vary for different lasers and or grades of substrate
**Please note power,speed and Q-Frequency units match with your laser
** Q-Frequency: You may need to go to advanced settings to change the Q-Frequency above 80 KHz

	Brilliance Laser Inks 12 oz Aerosol	Brilliance Laser Inks Liquid Ready	Brilliance Laser Inks Powder (50 g)	Brilliance Laser Inks Powder (250 g)
Brush Coverage (approx.)		500 sq. in.	1,000 sq. in.	5,000 sq. in.
Spray Coverage (approx.)	4,000 sq. in.	1,000 sq. in.	2,000 sq. in.	10,000 sq. in.
Colors	Black, Red (Copper)	Black, Red (Copper)	Black	Black
Preval Ready		✓

Black Metal Laser Spray Can - 2oz Aerosol