Follow these easy 4 steps below for better results.
Step 1. Clean and Mix
Clean the substrate with alcohol so it's free of any dirt and oil.
With denatured alcohol, fill to the desired brush or spray application line, mix and stir the content well.
Note: You may substitute denatured alcohol with isopropyl alcohol, ethanol, rubbing alcohol or methanol.
Step 2. Apply and Dry
Brush application: Every purchase of our liquid ready comes with one (1) foam brush applicator. Apply even coats with the foam brush as long as you do not see the substrate through the coat.
Step 3. Engrave
Adjust your laser settings and focus the beam on the substrate then make your mark!
Step 4. Wash
You may instantly wash off the excess ink with water or a damp cloth. There is no waiting time needed!
Voila! You now have a permanent mark on your finished product.
Here's the result!
On this process we use our Black Metal Liquid Ready to mark this stainless steel wine flask .
Watch the full video here!
Suggested Laser Settings
40 Watts Diode Laser
-
Stainless Steel
-
Copper
-
Brass
Elevate Your Engravings: Stunning Results with Liquid Ready Powder
Discover the stunning outcome achieved with Brilliance Laser InksBlack Metal Liquid ReadyPowderthrough these images.
