Red (Copper Tone) Stainless Steel Liquid Ready - Laser Marking Powder
- Regular price
- Regular price
- Sale price
• Ships Worldwide
• Free shipping on orders over $100 in the US only.
• Ships within 1-2 business days in the US and Canada
• Ships within 7-10 days for the rest of the world
Why Brilliance Laser Inks?
Laser marking made easy with our Liquid Ready (in 120 ml)
Exceptionally adaptable laser marking inks to create high quality permanent mark on a various metal surfaces.
Liquid Ready as the name describes contains pre-measured powder product and is ready to add denatured alcohol without any hassle. It is also compatible to preval spray system which makes the product convenient to use.
Note that this product does not include any alcohol in the package. Below application tutorial is for instructional purposes only.
How To Apply Liquid Ready
Clean the substrate with denatured alcohol so it's free of any dirt and oil.
With denatured alcohol, fill to the desired brush or spray application line, mix and stir the content well.
You may substitute denatured alcohol with isopropyl alcohol, ethanol, rubbing alcohol or methanol.
Brush application: Every purchase of our liquid ready comes with one (1) foam brush applicator. Apply even coats with the foam brush as long as you do not see the substrate through the coat.
Preval spray system application: Screw on a Preval spray system to the bottle and spray evenly just like an aerosol spray.
Allow the solution to dry fully or use a hair dryer or heat gun to dry it in seconds.
Adjust your laser settings and focus the beam on the substrate then make your mark!
For guidance, refer to the table below for suggested starting parameters for your laser and substrate. For optimal results, you may need to adjust the parameters for your specific laser.
You may instantly wash off the excess ink with water or a damp cloth. There is no waiting time needed!
Voila! You now have a permanent mark on your finished product.
CO2 Laser Settings
|Substrate||Power||Speed in Percent||Speed in mm/sec||DPI|
|General Metals (Tool steel, Stainless, Mild steel etc.)||30W||10%||100||350-500|
Fiber Laser Settings
|Substrate||Power||Speed in mm/sec||Q-frequency||Hatch or DPI|
|Stainless Steel||10W||50||200 - 500 KHz||0.1 mm|
|Brilliance Laser Inks 12 oz Aerosol||Brilliance Laser Inks Liquid Ready||Brilliance Laser Inks Powder (50 g)||Brilliance Laser Inks Powder (250 g)|
|Brush Coverage (approx.)||500 sq. in.||1,000 sq. in.||5,000 sq. in.|
|Spray Coverage (approx.)||4,000 sq. in.||1,000 sq. in.||2,000 sq. in.||10,000 sq. in.|
|Colors||Black, Red (Copper)||Black, Red (Copper)||Black||Black|