Applying liquid powder for various applications can be straightforward if done correctly. Follow these steps below for the best results:

Step 1. Clean and Mix

Clean the substrate with alcohol so it's free of any dirt and oil.

With denatured alcohol, fill to the desired brush or spray application line, mix and stir the content well.

Note: You may substitute denatured alcohol with isopropyl alcohol, ethanol, rubbing alcohol or methanol.

Step 2. Apply and Dry

Brush application: Every purchase of our liquid ready comes with one (1) foam brush applicator. Apply even coats with the foam brush as long as you do not see the substrate through the coat.

Allow the solution to dry fully or use a hair dryer or heat gun to dry it in seconds.

Step 3. Engrave

Adjust your laser settings and focus the beam on the substrate then make your mark!

Step 4. Wash

You may instantly wash off the excess ink with water or a damp cloth. There is no waiting time needed!

Voila! You now have a permanent mark on your finished product.

Here's the result!

On this process we use our Black Metal Liquid Ready to mark this stainless steel wine flask .Watch the full video here!

Shop now

Elevate Your Engravings: Stunning Results with Liquid Ready Powder

Discover the stunning outcome achieved with Brilliance Laser Inks Black Metal Liquid Ready Powder through these images.


What is the difference between liquid ready and powder?

Liquid ready 

  • as the name describes, contains a pre-measured powder products and is ready to add denatured alcohol without any hassle.
  • This product was launched for ease of use to our customers as it does not require any weighing process and has markings on the side of the label to add denatured alcohol up to the mark for either brush and spray applications. (foam brush is included with this product).
  • These bottles can easily be converted into spray as they are already Preval Ready containers, just take the cap off and screw on your Preval spray system right on it. 
  • Learn more about Preval Systems and how to convert it into spray -
  • Click this link for a quick guide on how to use laser marking liquid-ready products. Add the link here


Whereas Powders are sold in bulk packages starting from 50g250g500g and 1000g containers.

  • These containers do not have convenient labels or premeasured powders to be used as mixing jars. 
  • For bulk powders, please weigh the product in a separate beaker to create your desired ratio of powder and alcohol mixture.
How to weight the laser marking powder and create a proper mixture?

Please mix Denatured Alcohol with the desired amount of powder to create a solution

Can I use any alcohol to mix with liquid ready or powder?

Yes, you can use other solvents like IPA etc. the only reason as per our R&D team is generally Denatured Alcohol does not tarnish the metal substrates.

Have any more questions?

Visit our FAQ page to know more or contact us at