Generally you need to max out your power and slow down your speeds in order to attain high peak temperature levels for bonding on these high heat conductive metals. Slowing down your speed will also depend on how thick the metal is so you don’t warp it.

Indeed, the mark is long-lasting and not readily erasable. The sole method to eliminate it is by machining the surface with fine sandpaper or a block. Prior to proceeding with a production run, it is crucial to test the mark's settings, permanence, and contrast on scrap metal to ensure its durability. Typically, removing the mark without impacting the substrate's finish proves to be unfeasible in most instances

Plastic Laser Marking additives Must involve Injection molding or extrusion process and can work only with Fiber and Yag lasers.

It is NOT something you can apply on pre-existing plastic parts and mark with laser. It has to be processed with molding. Lazact Black or Lazact white is available in master batch form (small plastic granules) which can be mixed with your resin at 2-5% LDR by weight of the molding shot. The molding machine screw then mixes it with your resin in the barrel at 200 to 400 F and is then injected in your steel mold at a high pressure. 

For more information contact our tech support at 609-534-7008

Our product works in a similar manner to the competition in usage and application with the following advantages:

• Affordable / value price: Our products are competitively priced compared to the competition.

• More Value: up to 25% more coverage than competition for our metal marking products.

• No scrubbing: After marking, overspray can be easily washed or wiped off with a wet cloth.

• No staining of the metal

• Anti clog technology

• Long Shelf life: Several years

• Fast Drying in Seconds: We recommend to use hair dryer or heat gun to dry it within seconds which speeds up the process.

• No blistering: Does not blister up, if you use a hair dryer or heat gun.    

Our current offering for metal markings is Black and Red (Copper tone). However our team is working on including white which will be launched soon.

Yes, it should work with the 10 watt diode. Please see a very recent video below all about our product and diode lasers. 

Any of our BLI101... powder products are reusable after you mix it with Alcohol, the only condition is that it's kept with the lid closed tightly and the powder product is fully submerged in the solvent. Just stir it again and use it in the future. You can always add a few more drops of alcohol to compensate for minor evaporation so you get consistent application.

We have a few customers who are using our products to engrave on kitchen knives and utensils as well as barbecue instruments. While laser marking technologies require additives and ink coatings from BLI, they are primarily determined by the end-user and their usage. Depending on their correct application and procedure, the final user must acquire FDA approval. Settings can vary depending on the substrate grade and the laser machine specs. Our suggestions are just a starting guideline.

We test our final results/applications after marking on metals especially when there is a food contact requirement and make sure that its not coming off or getting faded in alcohol, dishwasher and other tape tests and even scotch-brite pad. We would clean it thoroughly with water and soap or dishwasher them and clean them with alcohol before using it for food application. If you see the marking is coming off then its merely a speed and power setting issue that can be easily fixed. Finally, as you see above, food safety is also determined by the mark's performance, which is influenced by your process, settings, and testing to ensure that the final finished product meets legal guidelines.

We're always here for you. Please don't hesitate to contact us if you have any questions regarding how to use our solution for your needs.

Yes, we do offer markings for Ceramic and Glass. Currently, these are available in convenient aerosol cans, providing ease of application and consistent results. Our team is working on creating powder and liquid-ready, please stay tuned.

Brilliance Laser Inks provides high quality laser marking inks.  FDA approval must be obtained by each manufacturer where the process of marking would be considered part of the items manufacturing process. Laser marking process is not something the FDA can approve by itself.  It would really depend on the application process if it's followed correctly. You may also refer to our customer's testimonies or feedback that used our product.

A permanent mark is almost impossible to remove unless machined. The simplest way to machine would be using a fine sand paper or block in the same direction of the substrate grains this way the surface finish does not get distorted or look scratchy. 

Beware : Always try and test the a scrap metal to check the settings, permanency and contrast prior to do a production run. In some cases it's not possible to remove the marking.

If you are interested for a free sample, please click this link.

We only recommend engraving on bare metals when using the Black Metal Laser Marking Inks. Engraving on coated metals can lead to the coating being compromised or damaged, resulting in an uneven or imperfect engraving.

Available on our website under the Product's Specification.

- Click on this link to view the SDS -

Available on our website under the Product's Specification.

- Click on this link to view the SDS -

Aerosol cans provide coverage for around 4000 square inches per can, while powder products offer coverage of about 20 square inches per gram with brush application and approximately 40 square inches per gram when applied using a spray gun or an air knife. Currently, aerosols come in 12oz and 2oz sizes, whereas powder products are offered in four different sizes: 50g, 250g, 500g, and 1000g. Additionally, we offer a product called liquid ready, which contains the same concentrated powder for customer convenience. This product features a fill arrow mark on the label, eliminating the need to weigh the powder; customers just need to add alcohol up to the mark for the correct ratio.

Brilliance Laser Inks typically take about 2-3 minutes to dry after being applied to a surface. You can speed up the drying process by using a hair dryer, which can dry the ink within seconds

Laser marking spray is applied to a surface before laser marking to enhance contrast and durability. Once the spray dries, a laser interacts with the coating, causing a chemical reaction that creates a high-contrast, permanent mark. After marking, any excess spray is washed off, leaving the mark intact. This method is ideal for metals, ceramics, and other glass surfaces, as it ensures a clear mark without damaging the material. To learn more, please visit this link: https://brilliancelaserinks.com/pages/how-to-apply

Markings made with BLI101MBA502 on stainless steel cannot be erased. if it’s done correctly, if you really wanna remove it, then you may have to sand it down or grind it.

We offer the Black Aluminum Metal Marking Ink Spray, specifically crafted for marking aluminum surfaces. While it might work on colored aluminum metals, we haven't tested it in those scenarios, so it would be a good idea to conduct some trials first. Additionally, the results may vary depending on the laser machine you are using.

Copper Tone laser marking spray is designed for stainless steel.

Yes, other compatible lasers are Fiber and CO2 lasers. For optimal results, explore our settings page for detailed recommendations tailored to your needs, https://brilliancelaserinks.com/pages/settings.

Yes, we ship our products worldwide. However, please note that shipping availability may depend on your specific order and your country's regulations, especially when it involves shipping aerosols. We're currently upgrading our international order process, in the meantime, we can send an automated invoice to assist with your orders. Please fill out the form below, and our support team will get back to you. https://docs.google.com/forms/d/e/1FAIpQLSd-Ga6HzZCdHtPebBeNiLy6Fm7ddqmUP_VavT6bInfyKZreyA/viewform

Our black spray cans are white when you apply them on metal but when you start engraving, it marks pure black. For more information please check this link https://brilliancelaserinks.com/pages/about-products

our laser inks only work with metals. We also have plastic additives that need to be combined during the molding process.

Liquid ready as the name describes, contains a pre-measured powder products and is ready to add denatured alcohol without any hassle.

This product was launched for ease of use to our customers as it does not require any weighing process and has markings on the side of the label to add denatured alcohol up to the mark for either brush and spray applications. (foam brush is included with this product).
These bottles can easily be converted into spray as they are already Preval Ready containers, just take the cap off and screw on your Preval spray system right on it.
Learn more about Preval Systems and how to convert it into spray - https://preval.com.
Click this link for a quick guide on how to use laser marking liquid-ready products. (Add the link here )

Whereas Powder products are sold in bulk packages starting from 50g, 250g, 500g, and 1000g containers.
These containers do not have convenient labels or pre-measured powders to be used as mixing jars.
For bulk powders, please weigh the product in a separate beaker to create your desired ratio of powder and alcohol mixture.

Please mix Denatured Alcohol with the desired amount of powder to create a solution.

Yes, you can use other solvents like IPA etc. The only reason as per our R&D team is generally Denatured Alcohol does not tarnish the metal substrates.

Yes, you can reuse our laser marking powder after mixing it with alcohol. As long as our powder product is fully submerged in alcohol if it’s not submerged and it will dry up, it will not be reusable, so please make sure to keep the lid of the container closed tightly and store it in a cool, dry place. Stir it before each use and add a few extra drops of alcohol if needed for consistent application.

Currently, we recommend only using our products on bare metals.

Please mix Denatured Alcohol with the desired amount of powder to create a solution.For brush application, mix denatured alcohol and powder at a 1:1 ratio by weight. For example, 10 grams of powder and 10 grams of alcohol to make a 1:1 ratio.For spray gun, air knife, or Preval application, mix denatured alcohol and powder at a 1:2 ratio by weight. For example, 10 grams of powder and 20 grams of alcohol to make 1:2 ratio.Please watch how-to video. (Link here)

• No, we don't recommend it – 🚫 it's best to minimize or turn off the airflow/air assist because our product can be removed from the surface with strong airflow before lasering.Please do not confuse airflow with exhaust as you would need the exhaust while laser marking is in action to remove the unwanted fumes and debri from contaminating your optics.

Our black metal marking spray is a universal metal marking product and will also work on aluminum. But everything else on a product may have some limitations as there are several grades of metals for aluminum available in the market so it’s best to test it in your situation on your laser before you proceed to a volume purchase. For this very reason, and on-demand of our aluminum lovers we have already created marking specifically for aluminum, this is to expand our range of different aluminum grades and a variety of different lasers that can give higher permanency in those situations.

For aluminum surfaces, consider experimenting with our latest product, the Black Aluminum Metal Marking Inks. This specialized ink is formulated for use on aluminum metals, including anodized surfaces. 

Our Universal Black Metal Laser Spray is perfect for marking uncoated metals like stainless steel, brass, copper, and other metal surfaces.

Shelf life is one year.

1. Clean - Wipe the substrate with alcohol so it's free of dirt and oil. 

2. Spray - Before applying shake well, Spray 6-8 inches from the substrate surface, apply a thin coat and hold it at 45° degrees using left to right motion, as long as you do not see through the surface.

Do not have to overspray!

(Tip: Give 5-10 second quick shakes in between long sprays)

3. Dry - Use a Hair dryer to dry it in seconds. 

4. Mark  - Mark must be dry, and your laser settings should be adjusted and focused according to the material.

5. Wash - Rinse or wipe with a wet cloth. No need to wait after marking.

1. Clean - Use denatured alcohol to clean the substrate, ensuring it is free of oil, dirt, and grease.

2. Dilute - Fill the bottle with denatured alcohol up to the FIRST line.

Shake/Stir Well 

3. Apply - Brush mixture onto the surface with even coats

4. Dry - Ensure that the mixture is completely dried on the surface

5. Focus - Ensure the laser is focused on the substrate

6. Mark - (Speed and Power FAQ)

7. Finish - Wash off excess powder

• Mix Denatured Alcohol to the desired amount of powder to create a solution.
• For Brush Application: 1:1 Ratio by Weight (e.g 5gm of Powder To 5gm of Alcohol)
• Spray Gun or Air knife or Preval Application: 1:2 Ratio by Weight (e.g 5gm of Powder To 10gm of Alcohol)

You may check the status of your order by clicking this link https://brilliancelaserinks.com/apps/aftership, and enter either your order number or tracking number.

You may check the status of your order by clicking this link https://brilliancelaserinks.com/apps/aftership, and enter either your order number or tracking number.

You may check the status of your order by clicking this link https://brilliancelaserinks.com/apps/aftership, and enter either your order number or tracking number.

Orders can be canceled if it hasn't been shipped. Contact us via chat, email, or phone call to request a cancellation.

If your order hasn't arrived by the expected delivery date, we recommend reaching out to the carrier for updates. If you need further information about your order status, feel free to contact us via chat, email, or phone.

Expedited shipping for aerosols isn't possible as they're classified as hazardous materials. For powders or liquid-ready products, we can arrange overnight shipping if requested before 1:00 PM EST. However, additional shipping charges may apply for any special requests, and expedited shipping for international orders is not available.

We advise contacting us via chat, email, or phone call for any return request.

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too. If more than 15 business days have passed since we’ve approved your return, please contact us at support@brilliancelaserinks.com.

In the event that your order arrives damaged/wrong in any way, please email us as soon as possible at support@brilliancelaserinks.com with your order number and a photo of the item’s condition. We address these on a case-by-case basis but will try our best to work towards a satisfactory solution.

In the event that your order arrives damaged/wrong in any way, please email us as soon as possible at support@brilliancelaserinks.com with your order number and a photo of the item’s condition. We address these on a case-by-case basis but will try our best to work towards a satisfactory solution.

You can update your shipping address as long as the order hasn't been shipped yet. If you're unable to make the change, our support team is ready to assist you. Simply reach out to us via chat, email, or phone call.

We accept payments through debit or credit cards, PayPal, and Shop Pay.

We accept only one payment method per order.

If your payment didn't process, please contact your bank. If there are no issues with your bank, feel free to reach out to our support team for assistance.

You can apply the discount code at checkout.

For orders within the US, only the shipping cost will apply. For international orders, additional fees such as hazmat fees, duties and taxes may be charged.

For a detailed invoice, please contact our support team via phone, chat, or email.

If your order hasn't been shipped yet, you can contact our support team to add more products to it.

In the event that your order arrives damaged/wrong in any way, please email us as soon as possible at support@brilliancelaserinks.com with your order number and a photo of the item’s condition. We address these on a case-by-case basis but will try our best to work towards a satisfactory solution.

Please contact our support team via chat, email, or phone for further assistance.

For international markets, our powder products, liquid ready and plastic additives are safe to ship via air. We do offer international shipping on our aerosol cans. However, we have to ship under a hazmat category which requires special packaging and a minimum order quantity.  Please contact us for more details.

https://brilliancelaserinks.com/pages/contact-us

For orders international, delivery takes 10-15 business days depending on the carrier and your location.

We ship the products within 1 - 2 business days. 

We offer free shipping for orders above $100, only in the US. 

Currently we do not have local availability in your area. But soon we are working with Amazon UK, another warehouse in Ireland for Europe availability. For now we can ship directly from states. Please check out our international promotions on our website. 

We only do Free shipping on orders over $100 in the US only.

We ship worldwide! Shipping charges for your order will be calculated and displayed at checkout. Shipping charges can also be calculated in the cart via postal code

Are there any customs fees for international orders?

Shipping methods are identified depending on the shipping address. For domestic shipments, we use UPS and USPS. For international orders, we ship via DHL and FedEx.

You'll received an email notification once your order has been shipped.

Unfortunately, we do not offer pickup services. We currently operate exclusively online, accepting orders and payments through our website.

Expedited shipping for aerosols isn't possible as they're classified as hazardous materials. For powders or liquid-ready products, we can arrange overnight shipping if requested before 1:00 PM Eastern Time. However, additional shipping charges may apply for any special requests, and expedited shipping for international orders is not available.

Please contact your courier to investigate any lost or stolen packages.

You can update your shipping information as long as the order hasn't been shipped yet. If you're unable to make the change, our support team is ready to assist you. Simply reach out to us via chat, email, or phone call.

Some countries classify aerosols as hazardous materials and do not accept them. For more information, please contact our support team via chat, call, or email.

Yes, please ensure you enter your shipping address during checkout.

For domestic shipments, we use UPS and USPS. For international orders, we ship via DHL and FedEx.

Orders placed before 1 PM Eastern Time, Monday-Friday will be shipped the same day. Orders placed after 1 PM will be processed on the next business day.You may check the status of your order by clicking this link https://brilliancelaserinks.com/apps/aftership, and enter either your order number or tracking number.

You may check the status of your order by clicking this link https://brilliancelaserinks.com/apps/aftership, and enter either your order number or tracking number.

You may check the status of your order by clicking this link https://brilliancelaserinks.com/apps/aftership , and enter either your order number or tracking number .

You may check the status of your order by clicking this link https://brilliancelaserinks.com/apps/aftership , and enter either your order number or tracking number .

Please contact your courier for information regarding the delay in your delivery.You may check the status of your order by clicking this link https://brilliancelaserinks.com/apps/aftership, and enter either your order number or tracking number.

You can update your delivery address as long as the order hasn't been shipped yet. If you're unable to make the change, our support team is ready to assist you. Simply reach out to us via chat, email, or phone call.

We currently do not offer same-day delivery, but you can place an order through our Amazon store for same-day delivery service within the US.

For orders within the US, only the shipping cost will apply. For international orders, additional fees such as hazmat fees, duties and taxes may be charged.

You may check the status of your order by clicking this link https://brilliancelaserinks.com/apps/aftership, and enter either your order number or tracking number.

Delivery dates are not guaranteed and are subject to the courier's schedule.

Please contact your courier to inquire about the availability of contactless delivery.

You can update your delivery address as long as the order hasn't been shipped yet. If you're unable to make the change, our support team is ready to assist you. Simply reach out to us via chat, email, or phone call.

Please contact our support team via chat, email, or phone for further assistance.

You may check the estimated delivery date and status of your order by clicking this link https://brilliancelaserinks.com/apps/aftership, and enter either your order number or tracking number.

Some countries classify aerosols as hazardous materials and do not accept them. For more information, please contact our support team via chat, call, or email.

Please contact our support team via chat, email, or phone for further assistance.

Please contact your courier to confirm delivery availability on weekends.

Unfortunately, we do not offer pickup services. We currently operate exclusively online, accepting orders and payments through our website.

Expedited shipping for aerosols isn't possible as they're classified as hazardous materials. For powders or liquid-ready products, we can arrange overnight shipping if requested before 1:00 PM Eastern Time. However, additional shipping charges may apply for any special requests, and expedited shipping for international orders is not available.

Please contact your courier to check the availability of deliveries during adverse weather conditions.

Please click on this link and send your request to the management.

https://brilliancelaserinks.com/pages/contact-us  and answer these questions.

• Company name? (Optional)
• Website address? (Optional)
• Email Address?
• Phone Number?
• Billing Address?
• Shipping Address? (No need if same as Billing)
• How many employees do you have?(Optional)
• What type of product are you interested to print black on Metals?
  • Aerosol Can
  • Liquid Ready
  • Powder
  • Other (Specify)
• What type of Laser do you have and its wattage?
  • Glass Tube 
  • Metal Tube
  • CO2  (Minimum 25-30 watts is recommended)
  • Fiber (Minimum 10 watts is recommended)
  • Yag   (Minimum 10 watts is recommended)
  • Any other diode lasers like 1-7 Watt is NOT suitable.
• What could be your expected annual usage/volume?
• What similar products do you currently use?

Yes, Our live support is available from 8am to 5pm EST. Outside window hours will still be entertained via email. You can contact us at support@brilliancelaserinks.com or 888-357-1628/888-357-1629 Toll free.

Yes we do, requires qualification for the process. in order to apply for it, click the link below to register

- Distributor Registration Form -

Plastic laser marking additives are materials mixed during plastic moldings to enhance their ability to be marked or engraved using a laser. They improve the contrast and quality of the mark, making it more durable and readable.

LaZact is a brand trademark word derived by our engineers that means as follows:

• Laser Activates White (LaZact White)

• Laser Activates Black (LaZact Black)

LaZact Additive products cannot be used on the surface of pre-molded plastics. It has to be mixed in the molding process.

LaZact additives interact with the laser light during the marking process. When the laser hits the plastic, the additives create a color contrast by either absorbing or reflecting the laser light differently than the base plastic. This results in a clear and permanent mark on the surface.

Our Lazact Additives are versatile and compatible with a wide range of plastics, including PP, PE, PC, PVC, ABS, TPU, PBT, TPR, TPE, HIPS, PA6/PA66, and ABS+PC, making it highly versatile and suitable for diverse applications. In general, LaZact additives are most commonly used when it is important to create a high-contrast mark on a plastic surface.

To achieve the desired outcome when using a 20-watt fiber laser, it's essential to employ optimal settings and additives. Adjust the speed to 500-1000mm/sec for best performance while setting your Q-frequency between 20-40kHz. When molding, precise mixing of the additive is crucial, and aiming for 2%-4% LDR is recommended. By taking care to ensure these critical elements are exact, you can have confidence that your result will be of the highest quality.

We understand that settings may vary depending on your laser machine type and specifications and application, we still suggest to contact our technical support team for more personalize recommendation.

LaZact additive is an ideal solution for marking on plastic during the molding process. Permanent marking can be accomplished using Fiber and Yag lasers, while using a diode laser for printing is something we are exploring further. For optimal contrast, we suggest introducing 1% to 4% LDR of LaZact Additives in your molding process.\

LaZact White for black moldings already contains both a laser additive and a black colorant.We advise against adding more colorant, as it could be counterproductive and may hinder the laser marking process.

Fiber and YAG lasers are compatible with Lazact Additives. These lasers provide precise and clear markings, ensuring detailed and vivid results on various plastics. The synergy between Lazact Additives and these laser types optimizes marking quality, enhancing both visibility and durability.

While UV lasers are used to for white markings on colored molded plastics

Our LaZact additive is an ideal solution for marking on ABS plastic during the molding process. Permanent marking can be accomplished using Fiber and Yag lasers while using a diode laser for printing is something we are exploring further. For optimal contrast, we suggest introducing 1% to 4% LDR of our granulated masterbatch or powder concentrate in your molding process.