Black Metal Concentrated Laser Marking Powder
- Precio regular
- Precio regular
- Precio de venta
• Ships Worldwide - DDP
• No Hidden Fees, Prepaid Duties and Taxes
• Free shipping on orders over $100 in the US only.
• Ships same business day* in the US and Canada, delivers in 1-4
• Delivers within 4-10 business days for the rest of the world
Why Brilliance Laser Inks?
Laser marking made easy with Powders (in 2oz & 12 oz)
Exceptionally adaptable laser marking inks to create high quality permanent mark on a various metal surfaces.
Get to explore our powder products that fit your needs. From personal projects to bulk production, we've got you covered! You can stock up on laser marking inks and buy from 50 g up to 1000 g of powder.
Note that this product does not include any alcohol in the package. Below application tutorial is for instructional purposes only.
How To Apply Powder
Clean the substrate with denatured alcohol so it's free of any dirt and oil. Weigh and mix denatured alcohol to the desired amount of powder to create a solution in a separate container.
Suggested powder to alcohol mixture:
Brush Application: 1:1 ratio by weight (e.g. 5g of powder to 5g of alcohol)
Spray Application: 1:2 ratio by weight (e.g. 5g of powder to 10g of alcohol)
*Double the coverage with spray application!
Brush Application: Every purchase of our liquid ready comes with one (1) foam brush applicator. Apply even coats with foam brush as long as you do not see the substrate through the coat.
Spray gun, air knife or preval application: Use a spray gun or air knife, or screw on a preval spray system to the bottle and spray evenly just like an aeresol spray.
Allow the solution to dry fully or use a hair dryer or heat gun to dry it in seconds.
Adjust your laser settings and focus the beam on the substrate then make your mark!
For guidance, refer to the table below for suggested starting parameters for your laser and substrate. For optimal results, you may need to adjust the parameters for your specific laser.
You may instantly wash off the excess ink with water or a damp cloth. There is no waiting time needed!
Voila! You now have a permanent mark on your finished product.
CO2 Laser Settings
|Substrate||Power||Speed in Percent||Speed in mm/sec||DPI|
|General Metals (Tool steel, Stainless, Mild steel etc.)||30W||10%||100||350-500|
|Brass, Copper and other similar high heat conducting metals||30W||3%||75||350-500|
Fiber Laser Settings
|Substrate||Power||Speed in mm/sec||Q-frequency||Hatch or DPI|
|Stainless Steel||10W||50||200 - 500 KHz||0.1 mm|
|Aluminum||10W||50||40 - 80 KHz||0.1 mm|
|Brass||10W||50||40 - 80 KHz||0.1 mm|
|Copper||10W||50||40 - 80 KHz||0.1 mm|
|Titanium||10W||50||200 - 500 KHz||0.1 mm|
|Brilliance Laser Inks Liquid Ready||Brilliance Laser Inks Powder (50 g)||Brilliance Laser Inks Powder (250 g)||Brilliance Laser Inks Powder (500 g)|
|Brush Coverage (approx.)||500 sq. in.||1,000 sq. in.||5,000 sq. in.||10,000 sq. in.|
|Spray Coverage (approx.)||1,000 sq. in.||2,000 sq. in.||10,000 sq. in.||20,000 sq. in.|
|Colors||Black, Red (Copper)||Black||Black||Black|